Controlled-products-systems-group 212ILW Uživatelský manuál Strana 7
- Strana / 28
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
212iLW/242iLW Standalone Keypad
Installation/Programming Manual
Document # 6050700, Rev. 1.1, D2d
7
4. Mounting
The keypad is designed to be flush mounted using a standard single-
gang electrical box. In addition, it can be flush mounted directly to
the wall surface by cutting a hole in the wall. To properly size the
mounting and wire access hole, use the installation template on the
last page in this manual and on the unit’s container.
Mounting height can vary depending on requirements. An
appropriate range is typically between 48 and 52 inches on center off
the floor.
For outdoor installations, use a weatherproof backbox and seal the
wire entry locations with silicone and provide a drain hole. In
addition, use the anti-oxidant grease pack for the wire harness
connectors.
Figure 3 Keypad Mounting Height
- 212iLW/242iLW 1
- Standalone Keypad 1
- Installation / Programming 1
- 1. Features and Product 2
- Description 2
- 1.2 Product Description 3
- 2. Specifications 4
- 3. Keypad Tampering 5
- 4. Mounting 7
- 5. Wiring 8
- 6. Testing the Keypad 15
- 7. Programming 16
- 7.2.1 Virtual Outputs 17
- 7.2.2 Audio Alerts 18
- 7.4 Programming Users 20
- Command 60 21
- Add/Modify Enhanced 21
- 8. Troubleshooting 25
- 9. Wire Harness Loopback 26
- Connections 26
- 10. Warranty 27
Související produkty a manuály pro Kontrolní panel Controlled-products-systems-group 212ILW
(8 stránky)RBH Sound Altavoces barra de sonido manuales de usuario
Empezando en A
Komentáře k této Příručce