Controlled-products-systems-group SK-910RB2Q Uživatelský manuál stáhnout pdf

This manual covers only one- and two-channel receivers. For information four-channel receivers, please contact SECO-LARM.

Installation Manual

One- and Two-Channel RF Receivers

The SK-910RBQ and SK-910RB2Q are wireless receivers that meets the growing demand for

receivers with multiple and independently controlled output functions. These RF receivers are

compatible with both code hopping and fixed code transmitters (see page 4 of this manual for a list of

compatible transmitters). The receivers can be used to control a variety of home automation devices

such as garage door openers, lights, motorized gates, lifts, or other devices remotely.

1. Mount the receiver out of sight in a location where it is not exposed to weather or moisture, and

where it is not surrounded by metal. Metal will block the RF signal, resulting in a reduced range.

2. For best range, pull the antenna wire as long and straight as possible. If the receiver receives

interference from local RF activity (e.g., an airport or military base), the antenna wire can be folded.

IMPORTANT: DO NOT CUT THE ANTENNA WIRE.

Installation Notes:

Introduction:

SK-910RBQ (315MHz)

SK-910RB-4Q (433.92MHz)

SK-910RB2Q (315MHz)

SK-910RB2-4Q (433.92MHz)

Flexible operating voltage: 11~24 VAC/VDC

Up to 500ft (152m) range

Independently programmable channels

Also Available from SECO-LARM:

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

SK-910RLQ ........................................... Low-voltage, one-channel receiver, 315MHz

SK-910RVQ ......................................................... Low-voltage, one-channel receiver,

transistor ground output 315MHZ

SK-910RL-4Q ................................... Low-voltage, one-channel receiver, 433.92MHz

SK-910RV-4Q ...................................................... Low-voltage, one-channel receiver,

transistor ground output, 433.92MHz

SK-910RB2Q shown

1 2 3 4

Shrnutí obsahu

Strany 1 - Installation Manual

This manual covers only one- and two-channel receivers. For information four-channel receivers, please contact SECO-LARM. Installation Manual O

Strany 2

ENFORCER Two-Channel RF Receiver 2 SECO-LARM U.S.A., Inc. Each channel relay can be progr

Strany 3 - SK-91ERSDQ

ENFORCER Two-Channel RF Receiver SECO-LARM U.S.A., Inc. 3 SK-

Strany 4 - Compatible Transmitters:

ENFORCER Two-Channel RF Receiver 4 SECO-LARM U.S.A., Inc. WARRANTY This SECO-LARM pr

Příbuzné modely SK-910RBQ

Komentáře k této Příručce

Žádné komentáře

Controlled-products-systems-group SK-910RB2Q Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Controlled-products-systems-group SK-910RB2Q. Controlled Products Systems Group SK-910RB2Q User Manual Uživatelská příručka

Shrnutí obsahu

Příbuzné modely SK-910RBQ

Komentáře k této Příručce

Související produkty a manuály pro Hardware Controlled-products-systems-group SK-910RB2Q